2025 Bingo, The New, New Cruelty And Lessons in Prevarication

It is time to reinstate The New Cruelty!!! Would that make it The New New Cruelty? For the uninitiated, this is my way of getting things done. Well painting and gaming stuff done. The Big Bug put a stop to it as well as life in general. Well here we are.

My energy on the low side lately. A side effect on the Big Bug. It seems to get in the way a lot. So in an attempt to move things forward I thought I would pay attention to the wider gaming community and a bit from the wider world too. Yes I am talking Painting Bingo as an adjunct to The New, New Cruelty. 

Then I thought maybe I could widen it out a bit. So it started with Painting Bingo. The big bug has taken away a good chunk of my mojo. Maybe having something to nark off would help. Then I thought if I could get myself to paint at least ten minis a month that would be an achievement. I mean I would like to do ten a week. The same should probably go for printing 3D minis. So I figured of I managed to double a target I could get a bonus. 

Then my brain got working. Which is hard work itself. Back In the Days of the Gold Old Days of The New Cruelty that I was managing four times the output and I had less on. So maybe I would put in the opportunity for some bonuses. If I manage to do double a target then I get extra jam. But only up to so much.

 

I figured that maybe I could spread it out to the rest of my life. The big bug has made reading difficult. Well reading anything of size. So maybe I could read a novel a month. Then I thought about putting some goals in there. 

So here we are. Instead of doing I am farting about with perhaps the most involved Painting Bingo ever. Such is my way. When I need an example of what procrastination looks like, I will come and look at this page/.It has taken a while to get it written because I keep running on empty. Its a good way to make me fart about for a few hours. The blocks for something about the way are really there because I can't think of something to put in there. I will know them when it happens.

Not much point in doing this if I don't get anything out of it. So I was going to give myself £50 for every block I completed. Then I worked out how much that would be. That seemed a lot. So then I thought maybe tone it down a little. Maybe half that.

Really this is an ambitious goal for me. My energy levels are low. Perhaps the lowest ever. Thanks to the Big Bug. So I am looking at this as part of a recovery plan. Exercise should form a part of this too. Maybe that is just a step to far at the moment. Getting the energy to do the basics is hard enough without medication.

More Thoughts On 3D Printing

So I have been doing a bit of work with my "brand new" toy. I have run about ten jobs through it now. My first attempt was an outstanding success. It was exactly what I was after. So I have tried a few more jobs.

The first thought I have is that it isn't easy. Of the ten or so jobs I have done so far about have have failed to print. I think I have worked out what the problem was. Yes, it was my fault. Will it get better? I will see. There is another job running as I type, so we will see.

So the remaining half have succeeded then? Errrrrmmmm. I think there have been a few cases where I have produced minutes I am completely happy with. Even then, lets just say there was nothing wrong with the print. The size isn't quite right. I haven't amended the size, they are just way to big. If a mini has no supports you can usually work out the height. The trouble is, those without supports depend on me putting supports in which is not so great,

Then there are prints that fail. On a tray full of minis, some or all of them might fail. There have been more abject failures than successes. I printed a couple of robots which came out alright. The trouble is that they are so flimsy, in order to keep them in scale, that they are just too fragile. They more or less disintegrated when I took the supports off. 

When all said and done there are only five figures that pass muster, One of them manages this because you can't see the bottom. Three look really good but are too tall. So out of ten ish print runs, there is only one figure that I am really happy with.

What next? Well I am going to keep going. I hope I am going to keep learning. 

ABC Warriors

So I have been doing some gaming with a new gaming group. Having a ball so far. Have played a wide range of games, most of which I haven't played before. I seem to be enjoying myself. For all my current luck, I seem to be doing okay with the dice. Maybe a little bit of tactics too.

This was a game of ABC Warriors. This is a game I liked the look of but was never going to buy. With two cards that gave us the hand of god, a sniper with a gun that seems to do the damage of a large artillery piece and a robot that is all but indestructible, the good guys won. With hardly a scratch.

3D Printing, Christmas And Other Things

In the first week of lockdown I brought a 3D resin printer. Over the years I had brought a few 3D printed bits and pieces and had generally found that, as least as far as FDM, they were a bit cheaper to buy but the quality wasn't all that. Most of the resin stuff I had brought off eBay just didn't turn up or was crushed. I could never get the thing to work. It seemed like such a waste of money that I gave up on the idea for a bit. A friend was given a resin orinteer. Decided he didn't want the fuss and went at got himself a bambu Labs printer. I have to say that this does nice work for an FDM printer. So he gave the resin printer, and a wash and cure station to me.

When I got the thing out of the box and it was exactly the same model as the one I already had.  When I had got that one I had spent days trying to get it to work and I gave it another go last year. With no joy. So I wrote it off as a dead duck and moved on. I had done all the research I could and it just didn't work.

Despite all of this I thought I would give it another go. It took some time but I eventually figured it out. The problem wasn't me it was the slicing software. Not just the random software I was using but the bespoke software for the machine. If I saved it different and used the oldest tiniest USB stick I could find, it worked. Then of course the wash and cure station didn't work but I quickly figured out what to do with that. I just need a new motherboard. 

So here am I, 3D printing. After four years of trying. It's mostly Star Wars Legion stuff. That seems to be more current focus. 

Then of course Christmas got in the way. There is a lot to do. Not least of which is the naughty elf. So I just get on with that. Around all the arsing about with the 3D printer. It's a process.

Having figured out that my XBOX was working and that it was my long covid riddled brain was at fault, I started on Dead Rising 4. Having played it through a lot and at about 95% of the achievements done, I used to be able to play the game on the hardest level. My brain isn't up to that anymore and I can't focus for long but I am making the most of it.

All this means I haven't been doing much painting. The Star Wars Legion stuff is still on the table as is the Battletech. There is a game coming up so I guess I should be finishing the mechs. My painting bench is the the bedroom which is where the 3D printer. So I have taken the decision to sleep on the sofa. This is not a long term solution so I will have to come up with some sort of solution. 

So here I am. Things are going as well as expected.